There is no doubt that LED products have a broad market prospect, especially in the field of lighting. If the LED light source is widely used in the lighting field, it will be a revolution in the history of human lighting. However, restricted by technology and other factors, it can not be widely promoted at present. Now there are many LED products used in the field of lighting, such as LED fence light, LED lawn light, LED spot light, LED water bottom light, LED buried light, etc.
The reason why it is used more and more widely is inseparable with the advantages of LED light source itself. About the LED light source energy saving, long life, no radiation (green light source) and other advantages, we should be more understanding, the following is related to the LED products.
A constant current DC supply shall be used for power supply
In order to reduce the product cost, some manufacturers use the "resistance and capacitance step-down" way to supply power to LED products, which will directly affect the life of LED products. Using a dedicated switching power supply (preferably a constant current source) to power LED products will not affect the service life of the product, but the cost of the product is relatively high.
Anti-static measures should be taken
LED products in the process of processing and production to adopt certain anti-static measures, such as: The workbench should be grounded, and workers should wear anti-static clothing, with anti-static rings, and with anti-static gloves, etc. If possible, anti-static ion fan can be installed. At the same time, the humidity of the workshop should be ensured at about 65%, so as to avoid static electricity caused by too dry air, especially green LED is relatively easier to be damaged by static electricity. In addition, the anti-static ability of LED of different quality grade is not the same, and the anti-static ability of LED of high quality grade is stronger. It should be noted that the increase of temperature will make the LED internal resistance smaller.
When the environment temperature, the LED light source internal resistance decreased, if use voltage regulator power supply will cause the LED working current increases, when more than the rated current, will affect the service life of LED products, serious will make the LED light source "burn out", so it's best to choose power supply, constant current source to ensure the working current of the LED is not affected by ambient temperature.
Sealing of LED products
No matter what LED products, as long as they are applied outdoors, they are faced with the problem of waterproof and moisture-proof seal. If not handled properly, the service life of LED products will be directly affected. Now a small number of manufacturers with high requirements for product quality use the traditional epoxy resin "watering" method to seal LED products. This method is more troublesome to operate, and is not very suitable for LED products with large volume (such as LED guardrail lights), which will also cause the weight of the products to increase.
Español
Pусский
Deutsch
中文
