How to Use Car Lighting System?

2019-10-28 17:25:26

The automobile light system is composed of low beam light, high beam light, driving light, fog light, reversing light and turning light. Low beam lamp, used when driving in urban area at night. In urban areas, there is a large traffic flow. Driving a distant light not only causes dazzle to the vehicles of the other side when meeting, but also affects the vision of pedestrians on both sides of the road. At the same time, there are street lights on urban roads, so it is not necessary to use a high beam to probe into the road in the distance, just to see the road conditions in front of the car. When the high beam light is on, the bright blue light will be on the instrument panel in the vehicle as a reminder. It's better to use high beam lights outside the wilderness or on the road without street lights, but remember to switch back to the low beam when meeting, so as to avoid dazzling the other driver. The driving light is the first gear of the light switch. At this time, all the instrument lights in the car will be on, and two small lights will also be on at the front and rear of the car. The brightness of these two lights is not big, mainly for the four corners of the car body to be seen. Fog lamp is a light signal used in heavy fog weather. The penetration of fog lamp in fog is stronger, so it is easier for vehicles or pedestrians to notice it as early as possible. The reversing lamp can illuminate the road and obstacles at the rear of the car, reduce the blind area when reversing, and also remind people at the rear of the car. Turn signal is a signal given to other vehicles and passers-by when turning to remind others to pay attention. Sometimes turn signals can also act as lighting in narrow areas, so that drivers can observe obstacles on both sides. When the turn signals at both sides are turned on at the same time, it can serve as warning and width indication.