How to choose: first, determine the bulb model of your headlight, buy a xenon lamp of the same model, and then install the xenon lamp bulb into the headlight assembly just like changing the headlight bulb, and then connect the stabilizer wiring, and fix the stabilizer (the temperature is high when working, please stay away from the plastic parts and oil supply system) to finish!

1. Do not install the stabilizer next to the heating body. Generally, it can be installed on the safety bar to help heat dissipation.2. Do not install the ballast near some wires or near the water source, such as the water tank. (excessive humidity will cause leakage and aging of ballast)

Now the use of LED lights is more and more widely, more and more automobile manufacturers will be equipped with the original lights as LED lights. Do you know what kinds of LED lights are commonly used in cars? We often use LED car lights.

Generally, the generation of light energy will be accompanied by the generation of heat, and the bulb will generate heat in the process of light-emitting. The LED bulb in the process of light-emitting is the conversion of electrical energy into light energy. In this conversion process, it is impossible to convert all electrical energy into light energy. According to the law of energy conservation, the remaining part of electrical energy will be converted into heat energy.

When it comes to lamp modification and upgrading, you will surely think of xenon lamp. Indeed, xenon lamp modification is no mystery.

1. Install xenon lamp directly; 2. Replace the modified headlamp assembly; 3. Install double lens on the original headlamp assembly.

Red and yellow are the most penetrating colors, but red represents "no passage", so yellow is selected. Yellow is the purest color. The Yellow anti fog lamp of the car can penetrate thick fog and shoot far away. Due to the relationship of backscatter, the driver of the rear car turns on the front light, which increases the background intensity and blurs the image of the front car.

The front fog lamp is installed at a lower position than the headlamp at the front of the vehicle, which is used to illuminate the road when driving in rainy and foggy weather. Due to the low visibility in fog, the driver's vision is limited. The Yellow anti fog lamp has a strong light penetration, which can improve the visibility of drivers and surrounding traffic participants, so that the vehicles can be found in a distance by the coming vehicles and pedestrians. The general vehicle fog lamp is halogen light source, and some high configuration models will use LED fog lamp.

If the engine is the heart of the car, then the headlight is the eye of the car. Since it is the eye, the importance of the headlight is self-evident. It not only affects the external beauty, but also is closely related to the driving safety. Therefore, for the majority of car owners, it is necessary to choose a lamp with the highest cost performance. Generally speaking, headlights are divided into halogen headlights, hernia headlights and LED headlights.

Automobile headlights, commonly known as "headlights.". The "soul" of headlight is its light bulb. Its performance will affect the effect of night lighting, directly related to driving safety. The service life of ordinary halogen headlamp is about 4 to 6 years. It depends on the night you drive and the time you use the headlights (day or night). HID light bulbs have no filament, so they have a longer life (10 years or more), while LED headlights have no filament or glass bulb, and will last tens of thousands of hours, which is usually the life of the vehicle.

The automobile has been born for more than 100 years, and it is also an era of rapid development of human scientific and technological capabilities. With the advent of the electrical age, the electrical components of the car have also undergone tremendous changes, the most representative of which is the development and evolution of the vehicle headlights. Do you know its functions?

It is also easy to cause traffic accidents at night, so the headlight should be inspected regularly and the brightness of the headlight should be adjusted.

Automobile lamps and lanterns are widely used in daily life. In 1985, LED automobile signal lamp first appeared on the bus. In 1986, the use of LED high mounted brake lamp on Nissan 300ZX automobile marked the official beginning of the era of LED automobile lamps.

In order to increase the purchase mode of low, medium and high configuration of the vehicle, when the customer purchases the vehicle, he can purchase the bulb and lens by himself.

According to the data report, 70% of automobile accidents happen at night, of which 50% are caused by headlight source, water in headlight, low beam fading, yellow shade, too low light source, not far high beam, etc.

Take Audi laser headlamp as an example. The light source of laser headlamp is laser diode. Blue laser converts it into white light through scales, and irradiates it on a 3mm lens.

There are the following provisions for automobile headlamp: the luminous capacity of low beam headlamp with rated voltage of 12V of motor vehicle shall be more than 1000-1200lm (LM is luminous flux unit: lumen), and the luminous capacity of high beam headlamp shall be more than 1450-1900lm.

The fog lamp is divided into front fog lamp and rear fog lamp. The front fog lamp is generally bright yellow, and the rear fog lamp is red. The light line of the front fog lamp sign is downward, and that of the rear fog lamp is parallel.

Motorcycle lamp is divided into direction lamp, headlight, tail lamp and brake lamp. The direction lamp is the most important equipment to inform other vehicles of their own trend, so we must confirm whether the direction lamp is normal or not before driving. The sound frequency of the relay can be used to judge whether the direction lamp is normal.

Xenon lamp and halogen lamp have advantages and disadvantages respectively. From the perspective of the effect of xenon lamp + lens on the ground, even the asphalt particles on the ground can be clearly observed; however, the combination of halogen + reflector may be weaker.